25 Items
show
per page

FieldShield Aerial Microduct Attachments

FieldShield Aerial Microduct Attachments provide the quickest and easiest way to attach FieldShield Figure-8 Microducts. Simply strip away the jacket from the support strand on the microduct to…

FieldShield Airtight Coupler

Airtight couplers are designed to provide simple, 2-click plug-and-play joining of microducts, enabling longer runs and safe pushing and pulling performance.

FieldShield Airtight Transition Coupler

Airtight Transition Couplers are used to join two different sizes of microduct.

FieldShield Assist Module

The FieldShield Assist Module is a hand-held, cordless drill-powered tool used to push FieldShield Fiber into unoccupied FieldShield Microduct. The Assist Module incorporates an integrated clutch that…

FieldShield D-ROP Aerial Microduct Attachment

FieldShield D-ROP Microduct Attachments provide the quickest and easiest way to attach FieldShield D-ROP 7mm Microduct. Simply place the pinch bracket around the D-ROP and pull to secure. As the…

FieldShield Duct Cutter

The duct cutter is used to make a clean, flat cut on any of Clearfield’s microduct products. It resembles a cigar cutter in that it has a fixed blade that is attached to a hinged mechanism to “cleave”…

FieldShield End Caps

End caps are airtight caps used to keep debris out of the end of the microduct when pulling duct through existing conduit and plowed holes, sealing the end of the conduit temporarily. The end cap is…

FieldShield Furcation Kits

Available in 1, 2, 6 and 12-fiber kits, the FieldShield Furcation Kit provides all the components to up- jacket and terminate 250 μm FieldShield Pushable Fiber using a 900 μm Splice-On Connectors. …

FieldShield Large Aerial Microduct Attachments

FieldShield Large Aerial Microduct Attachment provides the quickest and easiest way to attach FieldShield Large 14/10 Figure-8 Microducts. Simply strip away the jacket from the support strand on the…

FieldShield Microduct De-Burring Tool

Microduct De-Burring Tools are designed to make chamfering the inside of microducts simple, helping to ensure pushing and pulling are smooth operations. It is used after a cut has been made to…

FieldShield Microduct Field Repair Kit

There are many situations where two microducts need to be coupled together to continue the conduit pathway. Regardless of whether the microduct was cut after initial installation or if the duct…

FieldShield Microduct Pulling Carrots

The FieldShield Microduct Pulling Carrot provides an attachment point to direct bury FieldShield Microducts to pull them through existing conduit systems. The Microduct Pulling Carrot screws into the…

FieldShield Pull Sock

The FieldShield Pull Sock provides a pulling eye to install pre-terminated SC pushable assemblies and blunt drops using the integrated pull string that comes standard in all FieldShield Microducts. The…

FieldShield Rotary Duct Cutter

Rotary Duct Cutters are designed to make cutting all standard microducts as simple as possible without cutting the pull string inside.

FieldShield Rotary Fiber Tube Cutter

Rotary Fiber Tube Cutter are designed to strip away the outer jacket from FieldShield Optical Fiber without damaging the fibers inside.