StreetSmart Pre-Assigned FDH Cabinet
Clearfield’s StreetSmart Pre-Assigned FDH PON Cabinet provides an interconnect environment from the feeder network through the passive optical splitter to the distribution network.
Designed for rapid PON Network deployments, these cabinets provide a single distribution point, making it the ideal solution for deploying FTTH (fiber-to-the-home) where high potential take rates are expected. Pre-Assigned WaveSmart High Density 1 x 32 Splitters are loaded into the cabinet with a pre-terminated fiber tail, making installation and deployment very cost and time effective.
Ask a Question
Product Details
The StreetSmart Pre-Assigned FDH PON Cabinet provides a turn-key solution for up to 288 distribution fibers for an outside plant FTTx PON application. WaveSmart High Density 1 x 32 Splitters are installed and pre-assigned into Clearfield’s 12 pack SC/APC module adapters, allowing the service provider to instantly turn-up revenue-generating circuits.
The StreetSmart 288 PON Cabinet incorporates a cross-cut roof designed to shed water and includes a roof/solar shield and a reusable/replaceable venting feature, providing additional protection for deployed fiber. The outer shell of the cabinet is replaceable, allowing the cabinet to be repaired if damaged. Mounting options include pad, pole or vault mounted with either a 6” or 12” riser.
Features & Benefits
Integrity
- Terminations designed, tested and certifted to Telcordia GR-326
- Clearfield® FiberDeep® Guarantee: 0.2 dB insertion loss or less, exceeding industry standards
- Fiber cable certified to Telcordia GR-20 and GR-409
- Cabinets are designed, tested and certified to GR-3125
- Constructed with 0.090 aluminum
- Powder coated for additional protection
- 300 series stainless steel fasteners used on all cabinets
- Optional 6” and 12” risers
Protection
- 12 pack fiber modules protects fiber from environmental and human factors
- Rugged cable clamps protect the OSP cable breakouts from twisting and pistoning
- Patch only buffer tubes are fully protected with ruggedized, bend-limiting tubing
- WaveSmart High Density Splitters are built with ruggedized jacketing and bend-insensitive 900 um fiber for all input and output legs
- Cross-cut roof and venting provide additional protection in all environments
Access
- 12 pack fiber modules snap into bulkhead from the front allowing for quick visual troubleshooting without opening
- Front and side access doors
- Bottom exit/entrance for fiber cables
Investment
- Feeder and Distribution Fiber are pre-terminated into cabinet - No additional splicing required
- WaveSmart High Density Splitters are loaded and pre-assigned into cabinet
- Deployment time is minimized, allowing revenue generating circuits to be turned up immediately
Technical Specifications
| Specification | Description |
|---|---|
| Dimensions | 22.72” T x 15.47” W x 14.18” D (577.08mm T x 393.94mm W x 360.17mm D) * Without Riser |
| Weight | 40 lbs. (18.14 kg) |
| Dist. Port Density | 144 or 288 |
| Max. Feeder/Express Ports | 12 or 24 |
| Cable Entrances | 4 |
| Mounting Options (Hoist kits included with each cabinet) | Vault mount; pole mount; pad mount |
| Riser Base |
6”; 8 lbs (127 mm; 2.72 kg) 12” 12 lbs. (304.80 mm; 5.44 kg) Access door in rear of riser base on both the 6” and 12” risers |
| Pre-loaded WaveSmart High Density Splitters with 900um Legs | 4 or 8 |
| Splitter Staging Capacity | 72 |
| Connector Modules | 12 Pack Adapter Modules |
| Connector Types | SC/UPC, SC/APC |
| Cable Types | Indoor/Outdoor, Outdoor, Outdoor Armored, Ribbon and Loose Tube |
| Door Locks | 2 per door |
| Venting | Built-in Replaceable Roof Vent |
| Material | 0.90 (2.286 mm) Aluminum with almond powder coating |