StreetSmart Pre-Assigned FDH Cabinet

Clearfield’s StreetSmart Pre-Assigned FDH PON Cabinet provides an interconnect environment from the feeder network through the passive optical splitter to the distribution network.

Designed for rapid PON Network deployments, these cabinets provide a single distribution point, making it the ideal solution for deploying FTTH (fiber-to-the-home) where high potential take rates are expected. Pre-Assigned WaveSmart High Density 1 x 32 Splitters are loaded into the cabinet with a pre-terminated fiber tail, making installation and deployment very cost and time effective.

Ask a Question

How Can We Help?

Product Details

The StreetSmart Pre-Assigned FDH PON Cabinet provides a turn-key solution for up to 288 distribution fibers for an outside plant FTTx PON application. WaveSmart High Density 1 x 32 Splitters are installed and pre-assigned into Clearfield’s 12 pack SC/APC module adapters, allowing the service provider to instantly turn-up revenue-generating circuits.

The StreetSmart 288 PON Cabinet incorporates a cross-cut roof designed to shed water and includes a roof/solar shield and a reusable/replaceable venting feature, providing additional protection for deployed fiber. The outer shell of the cabinet is replaceable, allowing the cabinet to be repaired if damaged. Mounting options include pad, pole or vault mounted with either a 6” or 12” riser.

Features & Benefits

Integrity

  • Terminations designed, tested and certifted to Telcordia GR-326
  • Clearfield® FiberDeep® Guarantee: 0.2 dB insertion loss or less, exceeding industry standards
  • Fiber cable certified to Telcordia GR-20 and GR-409
  • Cabinets are designed, tested and certified to GR-3125
  • Constructed with 0.090 aluminum
  • Powder coated for additional protection
  • 300 series stainless steel fasteners used on all cabinets
  • Optional 6” and 12” risers

Protection

  • 12 pack fiber modules protects fiber from environmental and human factors
  • Rugged cable clamps protect the OSP cable breakouts from twisting and pistoning
  • Patch only buffer tubes are fully protected with ruggedized, bend-limiting tubing
  • WaveSmart High Density Splitters are built with ruggedized jacketing and bend-insensitive 900 um fiber for all input and output legs
  • Cross-cut roof and venting provide additional protection in all environments

Access

  • 12 pack fiber modules snap into bulkhead from the front allowing for quick visual troubleshooting without opening
  • Front and side access doors
  • Bottom exit/entrance for fiber cables

Investment

  • Feeder and Distribution Fiber are pre-terminated into cabinet - No additional splicing required
  • WaveSmart High Density Splitters are loaded and pre-assigned into cabinet
  • Deployment time is minimized, allowing revenue generating circuits to be turned up immediately

Technical Specifications

Specification Description
Dimensions 22.72” T x 15.47” W x 14.18” D (577.08mm T x 393.94mm W x 360.17mm D) * Without Riser
Weight 40 lbs. (18.14 kg)
Dist. Port Density 144 or 288
Max. Feeder/Express Ports 12 or 24
Cable Entrances 4
Mounting Options (Hoist kits included with each cabinet) Vault mount; pole mount; pad mount
Riser Base

6”; 8 lbs (127 mm; 2.72 kg) 12”

12 lbs. (304.80 mm; 5.44 kg)

Access door in rear of riser base on both the 6” and 12” risers

Pre-loaded WaveSmart High Density Splitters with 900um Legs 4 or 8
Splitter Staging Capacity 72
Connector Modules 12 Pack Adapter Modules
Connector Types SC/UPC, SC/APC
Cable Types Indoor/Outdoor, Outdoor, Outdoor Armored, Ribbon and Loose Tube
Door Locks 2 per door
Venting Built-in Replaceable Roof Vent
Material 0.90 (2.286 mm) Aluminum with almond powder coating
Cookies