To achieve certification on all Clearfield products, the full course combines training on Outside Plant products and Inside Plant products, in addition to instruction on the FieldShield Optical Fiber Protection System and the Clearview Blue, Clearview Black and xPAK Cassette systems.

    What is Covered in This Course

  • FieldShield & Clearview Cassette

    Course Overview

    The Clearview® Blue Cassette and xPAK are the central building blocks of every component in the FieldSmart® product portfolio. Clearview Black incorporates the same flexibility and scalability of Clearview Blue in a 50% smaller footprint.

    In this section, we will spend a significant amount of time to teach and explain the benefits of Clearfield’s modular and scalable design philosophy built around the craft-friendly Clearview Cassette to help you better understand why we do what we do.

    The FieldShield® Optical Fiber Protection System is a turn-key package to take fiber through the fields and streets to the home or business, up the tower to the antenna or throughout the riser to the data center or desk.

    The FieldShield training course is designed to teach and explain the different types of microducts offered by Clearfield, as well as their applications, placement methods, and installation best practices. 

    • Assemble and configure the six components of a Clearview Cassette
    • Splice loose tube and ribbon fiber into the Clearview Cassettes and xPAKs following Clearfield’s Best Practice Procedures
    • Be able to reroute fiber to switch cable exit “Redirect S”
    • Utilize the 144 Ribbon Breakout Kit and High Fiber Ribbon Breakout Box
    • Explain the benefits of using FieldShield Optical Fiber Protection to reduce installation costs and improve long-term network reliability
    • Understand the three components of the Optical Fiber Protection System
      • Microducts
      • Pushable fiber
      • Terminals
    • Know the best practices for each microduct placement method using the proper associated accessories
    • Be able to field terminate the SC, Dual LC and MPO Pushable Connectors
    • Maintain tone wire signal integrity when joining two direct buried toneable microducts
    Hands-On Training
    • Clearview Blue Cassette Construction
    • Clearview xPAK Assembly
    • High Fiber Ribbon Breakout Kit and Box
    • FieldShield D-ROP Installation
    • Direct Buried Toneable Microduct Field Repair
    • Aerial Microduct Dead-End Attachment and Flat Drop
    • Direct Buried Microduct Pushable Fiber Installation
    • SC Pushable Connector Outer Housing Assembly
    • Dual LC Pushable Connector Outer Housing Assembly
    • MPO Pushable Connector Outer Housing Assembly
    Video Demonstrations
    • Splicing in the Clearview Cassettes
      • Clearview Blue
      • Clearview xPAK
    • CraftSmart Splice-On Connector
    • FieldShield Pushable Fiber and Microduct Test Access Point (TAP) Box Installation
    • FieldShield StrongFiber Deploy with TAP Box
  • Frames & Panels

    Course Overview

    The flexibility in design and configuration of the Clearview® Cassette is implemented into all of the FieldSmart® products. Clearfield extends this flexibility and scalability to the FieldSmart FxHD System and FxDS Frame Kit. Like a system of building blocks, individual components of each system are configured to the environment in which they are placed for consolidation, distribution, and protection.

    In this course, you will learn how to assemble a complete frame kit from opening the box to aligning the front doors on the frame. We will teach you about our entire product lines of panels, protection options, and integrated optical component solutions. Be prepared to learn how to land cable, route and store buffer tube or ribbon, route jumpers and install splitter modules into these easy to configure, craft-friendly panels.

    This section will also include In-Building Access training coving Enterprise, Business Class and MDU solutions by delivering fiber through Indoor Wall Mount Panels. 

    • Be able to assemble the FieldSmart Frames following Clearfield's Best Practice Procedures
      • FxDS Frame Kit
      • FxHD Frame System
      • Standard Frame
    • Know the features and benefits of using each frame
    • Understand the panel components and protection options
    • Configure and install the different panel types and sizes
      • Patch Panels
      • Optical Component Panels
      • Tie Panels
    • Demonstrate Clearfield's design philosophy of slack storage, bend-radius protection, physical protection, and route diversity
    Hands-On Training
    • FxHD Patch Only Panel Installation
      • Mounting to Frame
      • Securing Fiber to Cable Clamp
      • Cable Prep and Routing
    • FxHD Patch and Splice Panel Installation
      • Cable Prep and Routing
      • Mounting to Frame
      • Slack Storage
    • FDP Indoor Wall Mount Panels
    • Fiber Entrance Cabinet (FEC)
    • Modular Optical Components (MOC)
    • 6-Drawer Splice Deck
    Video Demonstrations
    • FxDS Frame Kit Assembly
    • FxHD Frame System Assembly
  • Outside Plant Cabinets & Pedestals

    Course Overview

    The goal of today’s outside plant deployment is to cost-effectively consolidate and distribute fiber deeper into the network. At Clearfield, Outside Plant FieldSmart® products are designed from the ground up based on field-proven experience and offer truly unique solutions for today’s FTTx rapid deployment demands. FieldSmart Fiber Scalability Center (FSC) Cabinets use the same components as FieldSmart FxDS Frame Kits deployed in the Inside Plant allowing technicians the ease of working with a single fiber management platform regardless of Inside or Outside Plant deployment.

    In this section, you will learn about the Fiber Scalability Center (FSC) Cabinets and their different configurations. Training will focus on the various sizes, capacities, mounting options, installation practices and how to prepare and install the OSP cables. We will also teach you about and how to install the accessories, splitter modules and we will teach you proper jumper routing techniques. You will also learn about the 96 and 144 port PON pedestals, the different manufactures of compatible pedestals, how to prepare and install the OSP cables, splitter modules, and proper jumper routing techniques. 

    • Know the different sizes and configurations
    • 288 PON and the 432 PON, cross-connect cabinets can be pole mounted
      • All others are mounted on a vault
    • How to perform pole/vault mounting
    • How to bring in, prepare and install the OSP cable
    • Install splitter modules and route jumpers efficiently
    • How to prepare and install the OSP cables, splitter modules, and proper jumper routing techniques
    Hands-On Training

    288-Port PON Cabinet w/ 4” Riser

    • PON Cabinet Splitter and Staging Plate Installation
    • Mid-span Feed Through Plate Installation and Cable Routing
    • Routing Splitter Legs for Customer Turn-up
    Video Demonstrations
    • FieldSmart (FSC) PON and Cross-Connect Cabinets Overview
    • FieldSmart (FSC) Hub Collapse Cabinet Overview
    • FieldSmart (FSC) Pole Mount Kit Installation
    • FieldSmart (FSC) Cabinet Mounting using Drill/Bolt Template
      • Pad Mounting
      • Vault Mounting
  • Outside Plant Access

    Course Overview

    Whether it’s a pedestal, vault or wall box, we have the fiber management products to round out the last mile or access point of your network. FieldSmart Small Count Delivery (SCD) products can be placed aerially in pole or strand-mount closures, in pedestals on the ground or below-grade in small hand holes with closures that provide superior splicing or interconnect functionality. 

    • Different products associated with OSP Access
    • Different sizes and types of Outdoor Wall Boxes
      • Mounting the panel
      • Preparing and splicing the OSP cable
      • Jumper Routing
    • Small Count Delivery (SCD), Panels and Wall Boxes
      • Accessories
      • Different mounting options
    • Pedestals
      • Applications
      • Proper installation techniques
    • Fiber Protection Vaults (FPV)
    • Test Access Point (TAP) Box
    Hands-On Training
    • FDP and SCD Outdoor Wall Mount Boxes
    • Fiber Protection Vault (FPV) with Universal Mounting Bracket
      • Site Preparation
      • Excavation
      • Backfill Material
      • Tamping
      • Local community regulations and restrictions
    • Test Access Point (TAP) Box
    Video Demonstrations
    • Splice Only Pedestal Cable Prep and Installation

Set Up Training For Your Team

Sign up today to learn the proper installation techniques for Clearfield products, and be on your way to becoming a Clearfield Certified Partner.